Jennair JMC2427LM Manual página 7

NUMBER
PERCENT/
NAME
50%, Medium
5
40%
4
30%, Medium-
30
Low, Defrost
20%
2
10%, Low
1
NOTE: A percentage of 0% is also acceptable. This will not heat
up.
Cook Sensor
During the Sensor Cook function, a sensor automatically adjusts
for the cook time and power level.
The microwave oven display will show the time countdown once
the sensor identifies the cooking duration.
If the microwave oven door is opened during a sensor function,
the microwave oven will turn off and any additional operations will
be canceled.
For Best Cooking Performance:
Before using a sensor cook function, make sure power has been
supplied to the microwave oven for at least 2 minutes, the room
temperature is not above 95°F (35°C), and the outside of the
cooking container and the microwave oven cavity are dry.
My Creations
My Creations allows the customization of cooking processes.
When My Creations is selected from the main menu a list of
existing creations is presented along with the ability to create
more.
1. From the Cooking Mode menu, scroll until "My Creations" is
shown.
2. Select between Create New, Use Saved, or Delete/Edit.
NOTE: The first time MY CREATIONS is used, only "Create
New" will be displayed.
3. Touch the Create New pad, and then touch NEXT.
4. Select the desired Cook mode. Choose between Convect
Roast, Convect Bake, Steam Cook, Defrost, Reheat, Cook,
Keep Warm, Soften, Melt, Boil & Simmer, Broil & Grill, and
Browning Pan.
5. Enter a Cook Time (–:–:–).
NOTE: The maximum total length of time of all three available
stages is 12:00:00.
6. Touch POWER to adjust cooking power, touch the desired
cooking power, and then touch SET.
or
7. If the "Convect Bake" or "Convect Roast" mode is chosen,
choose a cook temperature between 170° and 450°F (77°C
and 232°C), touch NEXT, enter a Cook Time (–:–), and then
touch SET and go to step 9.
NOTE: In the "Convect Bake" mode, the Power Level
selection is unavailable.
8. Touch NEXT.
USE
Cooking ham, whole
poultry and pot roasts.
Simmering stews.
Melting chocolate. Heating
bread, rolls, and pastries.
Defrosting bread, fish,
meats, poultry, and
precooked foods.
Softening butter, cheese,
and ice cream.
Taking chill out of fruit.
9. Review your settings. If any extra stage is needed, touch the
Stage you wish to set, and then touch ADD.
NOTE: Each stage set shows the following information: Mode,
Power/Temperature, and Cook Time. It is possible to have 3
stages.
10. Enter the information into each stage, and then touch SAVE.
11. Use the tumbler to select the shortcut menu where the
creation will be stored.
12. Touch SAVE or OVERWRITE. Overwrite will appear if there is
a creation previously stored in the chosen shortcut menu.
To Use Saved
1. Use the tumbler to select Use Saved from the menu selection,
and then touch NEXT.
2. Select the cooking creation you desire to use, and then touch
START.
NOTE: You may be prompted to open and close the door
before the creation can begin cooking.
To Delete
1. Use the tumbler to select Delete / Edit from the menu
selection, and then touch NEXT.
2. Using the tumbler, select the creation you wish to delete.
3. Touch DELETE.
To Edit
1. Use the tumbler to select Delete / Edit from the menu selection
and then touch NEXT.
2. Using the tumbler, select the creation you wish to edit and then
touch EDIT.
3. Use the tumbler to select the stage to be modified and then
touch EDIT.
NOTE: If a stage is empty, you can touch ADD to add an
action to that stage.
4. Select the desired Cook mode. Choose between Convect
Roast, Convect Bake, Steam Cook, Defrost, Reheat, Cook,
Keep Warm, Soften, Melt, Boil & Simmer, Broil & Grill, and
Browning Pan.
5. Enter a Cook Time (–:–:–).
NOTE: The maximum total length of all three available stages
is 12:00:00.
6. Touch POWER to adjust cooking power, select the desired
cooking power, and then touch SET.
or
If the "Convect Bake" or "Convect Roast" mode is chosen,
choose a cook temperature between 170° and 450°F (77°C
and 232°C), touch NEXT, enter a Cook Time (–:–), and then
touch SET and go to step 8.
7. Touch NEXT.
8. Review your settings. If any extra stage is needed, touch the
Stage you wish to set, and then touch ADD.
NOTE: Each stage set shows the following information: Mode,
Power/Temperature, and Cook Time. It is possible to have 3
stages.
9. Enter the information into each stage and then touch SAVE.
10. Use the tumbler to select the shortcut menu where the
creation will be stored.
11. Touch SAVE or OVERWRITE. Overwrite will appear if there is
a creation previously stored in the chosen shortcut menu.
7