Sanyo DP50749 Manual Del Usuario página 20

UNIVERSAL REMOTE CONTROL, ADVANCED OPERATION
DELETING A SINGLE LEARNING KEY
This process returns the key to its original pro-
gramming for the mode you select. You can also
delete learned programming by teaching a differ-
ent function to the key (see "Programming a
Learned Key".)
NOTE: If more than 10 seconds pass between key press-
es, the remote exits programming.
1.
Press the mode key that you wish to remove
the learned key from.
2.
Press and hold SET until the LED blinks twice,
then release.
3.
Enter 9 7 6. The LED blinks twice.
4.
Press the key containing the learned function to
be deleted twice. The LED blinks twice and
exits from programming.
DELETING ALL LEARNED KEYS IN A
SPECIFIC MODE
NOTE: If more than 10 seconds pass between key press-
es, the remote exits programming.
1.
Press and hold SET until the LED blinks twice,
then release.
2.
Press 9 7 6. The LED blinks twice.
3.
Press a mode key twice (i.e., DVD, STB, or AUX)
to clear all the learned keys for that mode. The
LED blinks twice and exits from programming.
C V
HANGING OLUME
The GXDB universal remote control comes preset
to allow independent volume control of each
selected device (Global Volume Unlock). However,
you may change the Volume Lock setting to Global
Volume Lock so that one device's volume controls
volume in all other modes. After that, you can per-
form Individual Volume Unlock on a selected
device to set its volume control for independent
operation or Global Volume Unlock to remove all
volume locking.
LOCKING VOLUME CONTROL TO ONE MODE
(GLOBAL VOLUME LOCK)
1.
Press and hold SET until the red LED blinks
twice, then release.
20
Need help?
All manuals and user guides at all-guides.com
L
OCK
www.sanyoctv.com
2.
Enter 9 9 3, the LED blinks twice.
3.
Press the mode key for the device you want to
control (for example, TV.)
4.
The LED blinks twice. Now when you press
+
–
VOL , VOL , or MUTE, the selected device (for
example, TV) controls the volume regardless of
the current mode.
UNLOCKING A SINGLE DEVICE'S VOLUME
CONTROL
1.
Press the desired device mode key (TV, DVD,
STB, or AUX).
2.
Press and hold SET until the red LED blinks
twice, then release.
3
. Enter 9 9 3. The LED blinks twice.
4.
Then press VOL
Volume is independently controlled for the
selected devices.
UNLOCKING ALL VOLUME CONTROL (RES-
TORING GLOBAL UNLOCK)
1.
Press and hold SET until the red LED blinks
twice, then release.
2.
Enter 9 9 3, the LED blinks twice.
+
3.
Press VOL .The LED blinks four times. Volume
is independently controlled for all programmed
devices.
P
ROGRAMMING
Channel control can be locked so that the GXDB
remote controls a single device's channel-chang-
ing functions, regardless of operating mode. This
is often enabled by users who watch all broadcast
TV through one device (e.g., a cable set-top box).
The affected keys are 1 – 0, CHL, CHM, and
RECALL.
LOCKING ALL CHANNEL CONTROLS TO ONE
DEVICE
To lock all channel-control functions to a specific
device, follow these steps:
1.
Press the mode key that relates to the device
that you use for channel changing control.
1-800-877-5032
–
. The red LED blinks four times.
C L
HANNEL OCK