Storage Instructions - patura Tornado Master 5.0 Instrucciones De Montaje Y De Uso

4.
Delivery, in-house transport, unpacking
4.1 Safety
Don't go under the Tornado Master 5.0 while it's transported and lifted by industrial truck or
crane!
4.2 Delivery
The Tornado Master 5.0 is delivered pre-assembled, fixed on pallets and protected from environmental conditions.
4.3 In-house transport
In-house tranport must be done by using suitable floor-level conveyors or suitable cranes. It is possible to move the fully
assembled machine by hand on even ground with the wheels mounted on the machine.
The unit has no breaks and can fall over if handled without care.
! !
Transport only by suitable qualified personnel by using suitable means of transport.
4.4 Unpacking
Remove the packaging material carefully and properly.
! !
Recycle the packaging material according to the local recycling regulations.
5.

Storage instructions

If the Tornado Master 5.0 has to be stored for a longer time, it must be stored in a suitable place (protected from direct sunlight
and environmental conditions).
Before using after storage: check the Tornado Master 5.0 for rust and damages and refill all
lubricants of the machine or of machine components.