patura Tornado Master 5.0 Instrucciones De Montaje Y De Uso página 32

Installation and mounting Instructions
7.6 Working with the Tornado Master 5.0
The Tornado Master 5.0 is mounted on the rear of the support device.
In the case of support devices with the option of attachment to the front, the Tornado Master 5.0
must be attached to the rear. If it is attached to the front, the necessary visual contact between
the driver and the operator is not given. This can lead to serious injuries or even death by running
over.
The driver moves forward at a constant speed. The operator takes the posts one by one from the magazine and inserts
them in the ground. The wires are hooked into the posts. The wires keep slightly tensioned at all times, to simplify the
operator's work and to build up the fence in an efficient way. During removal, the reel drive is activated by a toggle
switch. The driver moves forward according to the reeling speed. The operator walks to the side of the support device
and unhooks the wires from the next fence post.
The post can now be lifted out of the ground and placed into the magazine.
It helps to arrange the fencing posts in the magazine according to a system to guarantee easy picking
! !
for the next time.
The operator always has a view of the reels while working with the machine. If during the work the
wire on a reel runs out, the driver has to stop to change the reel.
The operator always has a view of the reels while working with the machine. If the reels are full or
the wire does not wind correctly, the driver has to stop to change the reel or to untangle the wire.
7.7 Changing of the magazine
The magazine of the Tornado Master 5.0 is exchangeable. To change the magazine easily, use our optional magazine
changing device. Lift the magazine of the Tornado Master 5.0 over the changing device and carefully put down. By
removing the spring split pin on the magazine unit and lowering the Tornado Master 5.0. you can remove the magazine.
A new magazine can now be fixed at the unit.
Insert the spring split pin again!