Assembly And Installation - patura Tornado Master 5.0 Instrucciones De Montaje Y De Uso

Installation and mounting Instructions
6.
Assembly and initial start-up
6.1

Assembly and installation

Assembly and installation are carried out in accordance with the general rules of technology and must be carried out by
qualified persons.
6.1.1 Assembly
Two persons are required for assembly.
Take the pre-assembled individual parts from the pallet.
Use the included screws to connect the parts
Now insert the magazine
secure it with the spring splint pin.
At last, insert the extension arm
according to the desired direction.
2
Assembly: First installation and other works may only be done by suitable, certified trained personnel
! !
by using suitable aids.
A and B
2 in the magazine holder and
C in the basic frame
.
B
B
A
C