Carton Contents; Important; Know Your Compound Miter Saw - KNOVA KN M-2500W Manual De Instrucciones

CARTON CONTENTS

UNPACKING YOUR MITER SAW
WARNING
To avaoid injury from unexpected starting or electrical shock, do
not plug the power cord into a source of power during unpack-
ing and assembly. This cord must remain unplugged whenever
you are working on the saw.

KNOW YOUR COMPOUND MITER SAW

Upper blade guard
Cover plate
Dust
bag
Laser
guide
Bevel scale
Hold-down
clamp
Base
Miter saw
Blade wrench
Switch handle
ON/OFF
trigger switch
Motor
Blade
Lower
blade
guard
Miter Scale
Positive Stop
Locking Lever
Miter
Handle
1. Remove the miter saw from the carton.
IMPORTANT: Do not lift miter saw by the Trigger Switch
handle. It may cause misalignment.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check each
one with the illustration to make certain all items are
accounted for, before discarding any packing material.
WARNING
If any part is missing or damaged, do not attempt to assemble
the miter saw, or plug in the power cord until the missing or
damaged part is correctly replaced. To avoid electric shock,
use only identical replacement parts when servicing double in-
sulated tools. Call Knova for replacement parts.
Hold-down clamp
Stop latch
Pivot bolt
lock nut
Table
Table
insert
5
Dust bag
Arbor
Lock
Positive
miter detents Mounting
hole
Miter handle
Fence
Hand
hold for
transportation