Assembly - Waldbeck Azteca Manual De Instrucciones

P-P button
Touch the "P-P" button, and the detector will convert to PINPOINT mode, to
locate the target accurately. Touch the "P-P" button once again, to exit the
PINPOINT mode.

ASSEMBLY

1. Relax the lock knob on the lower stem, take down the bolt. Install the
lower stem on the search coil, and lock it tightly. Note that the rubber
washer should be placed correctly.
2. Relax the LOCK NUT on the middle stem, press the silver button on the
lower stem, insert it into the middle stem.
EN
29