Quick-Start - Waldbeck Azteca Manual De Instrucciones

EN
32

QUICK-START

Preparation
1. Lay the detector
Put the detector on a wooden or plastic table, and let the search coil stretch
out of the table above 30cm, Keep away from walls, ceilings and floors,
turn off all kinds of electrical appliances that will cause electromagnetic
interference, remove watches and rings from hands.
2. Turn on
• Press the POWER button, the detector will sound two moo tones, and all
LCD patterns will be lit for a moment. And the detector is set by default
last shutdown.
3. ALL METAL mode test
Press the MODE button, the A-M cursor will light. Sweep six sample metals
(iron nail, nickel coin, pull-tab, Zinc coin, copper coin and silver coin) above
the search coil 7-10cm respectively.
a. The detector sounds three different tones in turn.
b. The depth cursor indicates the second grade.
c. The target cursor flashes respectively. The digital cursor shows the
corresponding number.