Waldbeck Azteca Manual De Instrucciones página 30

EN
30
3. Relax the LOCK NUT on the other end of the connecting stem. Press the
silver button on the upper stem, and insert it into the other end of the
middle stem .
4. Adjust the depth that the lower stem inserts to the middle stem.
Also, you can adjust the total length of the stem, making you detect
comfortable with your arm straight.
5. Wind the cable of the search coil around the aluminum stem, elastic
moderate, let it not sway. Plug the cable plot into the lower right of the
control box, aim at the slot, and plug into the end (see Fig.5). Note that
when plugging and pulling the plot, do not pull the cable, pull the plot.
6. Adjust the position of the bracket arm. Loosen the screw under the
bracket arm, making the bracket arm release up and down, remove the
bracket am and move it forward to a certain position, then tighten the
screws.