English
Charger features
• Charges 1 wireless and 1 USB connected device
simultaneously.
• USB-C outlet compatible with Power Delivery 3.0
standard (quick-charging).
• Wirelessly charges Qi-certified devices.
• Certified according to specification Qi 1.2.4 BPP.
• Temperature and power monitor for safety.
• LED status indicator for wireless charging.
Instructions for use
• Plug the power cable into the wall socket.
• For wireless charging, place the device to be
charged on top of the plus sign (+) on the
charger. The device must be placed directly over
the plus sign (+) for the charging function to work
optimally.
• If your battery is completely discharged, it may
take a few minutes before it starts charging.
• For USB charging, insert the USB cable in the free
slot and the other end in the device you want to
charge.
• When charging, only use a recommended USB
cable for your device and replace faulty cables
immediately.
Wireless charging LED indicator:
Power on: LED lights up for 3 seconds.
Charging: LED on.
Charging completed: LED off.
Error: LED flashes.
Good to know
• Devices may get warm during charging. This is
completely normal, and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device's
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
• Charger operating temperature: 0°C to 40°C.
• USB cable length and quality influences charging
speed and performance.
• Unplug the charger from the power source
before cleaning and when it is not in use.
• To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.
Recommended precautionary measures and
technical data, see the back of the charger.
Save these instructions for future use.
WARNING:
• The wall socket must be located near the
equipment and must be easily accessible.
• Only use in dry locations.
• Children should be supervised to ensure they do
not play with the product.
• Do not subject the devices to wet, moist or
excessively dusty environments since this can
cause damage to the devices.
• If the device is damaged, it should be disposed of.
• Never use a damage or faulty USB cable for
charging, since this can damage the product and
your devices.
• Only wirelessly charge devices that are Qi-
certified.
• Maximum load on shelf: 3 kg
Product servicing
Do not attempt to repair this product yourself.
If you open or remove parts, you may expose
yourself to dangerous voltage points or other risks.
RF EXPOSURE INFORMATION
According to RF exposure regulations, under
normal operations the end user shall refrain from
being closer than 20 cm from the device.
Technical data
Model: SYMFONISK charging shelf
Type: E2122
Input: 100-240V AC, 50/60Hz, max 2.5A
Output:
AC: 100-240 V AC, 50/60Hz, 1.0A
USB-C: 5.0V DC/3.0A 15.0W, 9.0V DC/2.0A 18.0W,
12.0V DC/1.5A 18.0W, 15.0V DC/1.2A 18.0W
Qi:
Operating frequency: 110 - 148 kHz
Output power: 0 dBμA /m at 10m
Indoor use only
Manufacturer: IKEA of Sweden AB
(commercial registration number: 556074-7551)
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
14