Indel B FLYINGBAR Instrucciones Para El Uso página 35

S M ART SYS TE M O PE R ATIO N M E TH O D
The SMART SYSTEM controls the turning on and off of the compressor based on the presence
or absence of the guest in the room. The use of the SMART SYSTEM requires the presence in
the room of an Energy Saver device: a card-holder designed to save energy.
The guest enters the room and inserts the card into the card holder; the Energy Saver device
sends a signal to the SMART SYSTEM to indicate that a guest is present in the room and the
minibar compressor stops (the products inside the minibar remain cold for a long time due to
the cold released by the coldholding plate). When the guest leaves the room and removes the
card from the Energy Saver holder, another signal is sent to the SMART SYSTEM and the mini-
bar turns on again. If the guest remains in the room for many hours and the cold accumulated
in the eutectic plate runs out, the minibar turns on automatically to keep the products cold. If
the room is not occupied for a long time, the minibar operates in high energy saving mode.
When the Flyingbar is used in SMART mode, its light goes on and stays lit for three minutes
when the guest enters the room.
WARNING!
With the SMART SYSTEM operation method, timer and standard operation methods are not
used.
33