Inspection, Reuse, Storage, Disposal - Permobil Compass Power Mount Hardware Operación Manual

Maintenance
Inspection
Inspect all components of the equipment weekly.
Check and tighten all fasteners and adjustment points.
Inspect all materials for wear such as stretching, fraying,
fractures, and bends. Some wear with regular use is
expected.
Components that show excessive wear should be replaced.
For information on replacements, refer to the "Warranty"
section in this manual
.
Reuse
You must re-fit the support to the new user or after
extended periods of non-use by the same user. Refer to the
adjustment and use instructions in this manual.
Before transferring to a new user, the product must be
completely cleaned and disinfected. Refer to the cleaning
and disinfecting instructions in this manual.
WARNING: The Tru-Shape back support is designed for
use by one person only. Re-use is NOT permitted.
Storage
Assembly or individual parts should not be stored in extreme
hot or cold temperatures. Only store in a clean and dry place
at room temperature.
Do not allow exposure to direct sunlight for prolonged
periods of time. This could age the product more rapidly and
decrease its effectiveness.
Do not store where there is risk of open flame or spark.
Disposal
Dispose of the product and/or components in accordance
with the applicable regulations in your jurisdiction.
CAUTION! DO NOT INCINERATE as a means of disposal.
Replacement Parts
Contact Customer Support for information on replacement
or individual parts available. Appropriate tools and fasteners
will be provided with extra and replacement parts.
Compass Power Mount Hardware Operation Manual
Warranty
This product is covered by the Permobil Lifetime Guarantee.
If a manufacturing defect should occur, discontinue use
immediately.
If a manufacturing defect should occur, the product will be
replaced at no cost to the buyer. Register your product at
permobil.com to activate the Lifetime Guarantee.
Wear from regular use is not considered a manufacturing
defect. Replacement parts are available by contacting your
supplier, distributor, or retailer.
Any alterations made to the product or defects caused by
irregular use voids the warranty. Compatibility with the
product is only guaranteed with the Permobil products listed
in this manual. Modifications in attempt to interface with any
other products voids the warranty.
Warranty Replacement Procedure
Warranty claims should be filed by the original purchaser.
End-users will need to contact the DME Supplier, Distributor
or Retailer from whom the product was purchased. In the
event the original dealer is not available, any authorized
Permobil DME supplier, distributor or retailer will provide
assistance.
DME suppliers, distributors or retailers with warranty issues
will need to contact Customer Support by phone or email
and provide the original purchase order number, sales order
number, or invoice number whenever possible. A Return
Merchandise Authorization (RMA) will be issued by Customer
Support so a warranty replacement order or quote can be
processed.
18