Safety Instructions; Machine Information - VONROC WL502DC Traducción Del Manual Original

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fi re and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Protection class IP65.
Do not cover the lens while operating the
work light. This may cause the work light to
overheat.
Do not dispose of the product in unsuitable
containers.
The product is in accordance with the
applicable safety standards in the European
directives.
SAFETY WARNINGS FOR WORK LIGHT
a) Please read and observe all safety warnings and
instructions enclosed with the battery or the
power tool with which the battery was provided.
b) Do not work with the rechargeable work light in
hazardous areas.
c) After the automatic shut-off of the rechargeable
work light, do not continue to press the On/Off
button. The work light should be recharged fi rst.
d) Do not direct the light beam at persons or
animals and do not stare into the light beam
yourself (not even from a distance).
e) Do not cover off the lens while operating the
rechargeable work light. The work light heats
up during operation and can cause burns when
the heat is allowed to accumulate.
f) Do not use the rechargeable work light in road
traffi c. The rechargeable work light is not ap-
proved for illumination in road traffi c.
WWW.VONROC.COM
g) Do not allow children to use the rechargeable
work light. It is intended for professional use.
Children can unintentionally blind themselves or
other persons.

2. MACHINE INFORMATION

Intended use
The rechargeable work light is intended for mobile
illumination in limited space and for limited time
in dry indoor areas and is not suitable for general
room lighting. The work light is equipped with
a USB power output which may be used to power or
charge USB compatible mobile devices.
TECHNICAL SPECIFICATIONS
Model No.
Input
Output
Battery voltage
Battery capacity
Power (max.)
Luminous fl ux
Beam angle
Run time (at 50% brightness)
Charging time
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. LED light
2. Power button
3. USB output
4. USB input
5. Charge level indicator
6. Foldable stand
7. Tripod mount
8. USB charging cable
9. USB Micro-B connector
10. USB A connector
EN
WL502DC
5V USB Micro-B
5V USB A
3.7V
4.4Ah
10W
1000lm
60 o x 120 o
4 hours
8 hours
0.46kg
3