Mounting The Push Handle - Kemper Dusty Evo Instrucciones De Servicio

5.2 Mounting the push handle

Pos. Description
1 Push handle
Mount the push handle as follows:
1. Screw the push handle (Pos. 1) tightly to the threaded holes provided on
the product with the six fixing screws (Pos. 2) using a suitable tool.
DANGER
Danger of falling or damage to the product!
The push handle (Pos. 1) is only used to push/pull the product.
• Never lift the product by the push handle!
1502937-00
Fig. 17: Mounting the push handle
Pos.
2
Tab. 15: Mounting the push handle
- 60 -
Description
Fixing screws (6 x)
EN