To stop the product
1. Pull the forward speed lever to "STOP".
2. Pull the cutting depth handle in the direction of the
handlebar and lift the blade.
3. Push down the throttle control fully.
16
4. Turn the ignition key to "OFF".
5. Close the fuel valve.
6. Clean the product, refer to
externally on page 18 .
Hour meter
Use the hour meter to see when servicing is needed
on your product. For more information, refer to the
maintenance schedule and the operator's manual for the
engine.
To clean the product
793 - 001 - 19.04.2022