Maintenance; Maintenance Schedule - Husqvarna Soff-Cut 2000 Manual De Usuario

Introduction
WARNING
maintenance work you must read and
understand the safety chapter.

Maintenance

Do a check for fuel and oil leakage.
Do a general inspection.
Examine the engine oil level.
Examine the hydraulic oil level.
Clean the blade and blade block guard *.
Clean the product.
Examine the controls.
Examine the blade block guard*.
Examine the cutting blade.
Examine the floating side cover.
Examine the skid plate.
Examine the fuel level.
Examine the wheels.
Clean the spark plug.
Examine the air filter and replace if it is nec-
essary.
Examine the drive belt and replace if dam-
aged.
Replace the oil .
Lubricate the blade shaft bearings.
Replace the air filter.
Examine the fuel tank cap
Examine the spark plug and electrode gap
Replace the fuel filter
793 - 001 - 19.04.2022
Maintenance
Before you do any
Every
use
X
X
X
X

Maintenance schedule

The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance marked with * see instructions in
Safety devices on the product on page 7 .
Weekly Monthly
Daily
(50 h)
X
X
X
X
X
X
X
X
X
X
X
X
X
Annually After the
first 20 h,
then
(200 h)
each 100
h
X
X
X
X
X
17