MSW Motor Technics MSW-STC-150 Manual De Instrucciones página 33

g) Insert one sled leg into each hole in the mount, then tighten the nuts so that the
sled legs and the mount make full contact.
h) Improper installation will result in the blade not being heated.
BLADE INSTALLATION ON MODEL MSW-STC-150BB:
a) Install the blade when the unit is unplugged and not hot.
b) Give the blade the desired shape. The blade is flexible and can be shaped as
desired. Examples of how to shape the blade:
c) Using the included wrench, loosen the nuts on the profile punch
counterclockwise.