Royal Catering RCFW-110D-PRO Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
b)
Pull the plug out of the socket before making adjustments, changing
accessories or storing the device. This preventive measure reduces the risk of
accidental activation.
c)
The device must be disconnected from the power supply before adjustment,
cleaning and maintenance. This preventive measure reduces the risk of
accidental activation.
d)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
e)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
f)
Keep the device out of the reach of children.
g)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
h)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
i)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
j)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
k)
Do not touch moving parts or accessories unless the device has been
disconnected from the power supply.
l)
Do not move, shift or rotate the device during operation.
m) Clean the device regularly to prevent the permanent accumulation of dirt.
n)
The device is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
o)
It is forbidden to tamper with the device in order to change its parameters or
construction.
p)
Keep the device away from sources of fire and heat.
q)
In order to prevent injuries, care should always be taken when carrying out
maintenance work, especially on the cutting discs.
CAUTION! Although the device has been designed to be safe and has been
equipped with adequate safeguards, and despite the use of additional safety
measures, there is still a small risk of accident or injury when operating the
device. Caution and common sense are advised when using the device.

Publicidad

Tabla de contenido
loading

Tabla de contenido