Preparation For Operation; Positioning Of The Unit; Working With The Unit - ulsonix AIRCLEAN 15000-H20 Manual De Instrucciones

4. Pumice diffuser
5. Ozone outlet
6. Power socket, fuse socket
7. Handle
8. Air filter, air inlet
9. Power cord

3.2. Preparation for operation

POSITIONING OF THE UNIT

The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. The unit should not be used in an environment with a high content of
oily substances in the air. Place the unit in a way that ensures good air circulation.
Maintain a minimum clearance of 10 cm from any wall of the unit. Keep the unit
away from any hot surfaces. Always operate the unit on a level, stable, clean,
fireproof and dry surface and out of the reach of children and persons of impaired
mental, sensory and intellectual functions. Place the unit in such a way that the
mains plug can be reached at any time. Ensure that the power supply to the unit
corresponds to that specified on the identification plate!

3.3. Working with the unit

OPERATION MODE SWITCH:
1) AIR mode - high ozone efficiency: for ozone treatment of rooms above 50m3.
Recommended operating time for different sizes of rooms in AIR mode:
Room area [m3].
Ozoning time [min]
50 `00 200
5 10 20
300 500 1000
30 50 100