Mains Power Connection; Mains Water Supply; Dimensions; Connections - Graf MAINS-ON-TAP Manual De Instrucciones

2.1

Mains power connection

Switching power supply input:
Switching power supply output:
2.2

Mains water supply

Supply volume:
Manual switchover to mains water
possible:
Permissible mains water supply
pressure:
Overflow according to:
2.3

Dimensions

Height (C):
Width (G):
Depth (A):
Weight:
2.4

Connections

Mains water connection (L):
Tank feed pipe (N):
Emergency overflow (M):
3.

Assembly and installation

Take the Mains-on-Tap and accessories out of the transport packaging. Check the entire system for
damage. Any damage must be reported before commencing installation.
3.1

Wall mounting

The system is designed to be mounted above the rainwater tank water level in a frost-proof, flood-
protected and dry location.
The unit must be installed sufficiently close to a power socket.
Mark and drill the required holes on the desired wall (space between holes 75 mm / 3") as per the holes
on the back of the Mains-on-Tap unit. The console can then be mounted on the wall using the mounting
kit supplied.
All manuals and user guides at all-guides.com
3. Assembly and installation
100-240 V AC / 50-60Hz
12 V DC
12 l/min / (3.2 US gallons/min.)
No
4.5 bar / (65 psi)
DIN EN 1717
DIN 1988
277 mm / (10.9")
218 mm / (8.6")
95 mm / (3.7")
0.6 kg / (1.3 lbs.)
15 mm / (0.6") quick fastener
36 mm / (1.4")
21.5 mm / (0.8")
11 / 28