Tramontina TRF25 Manual De Uso Y Mantenimiento página 19

• Before using the shredder, read the instruction and maintenance manual carefully.
• Before switching the shredder on, check whether the shredder tension is the same as the
electric outlet.
• Be careful not to overload the engine. Adjust the grain inlet tray to let enter only the amount
of material that the shredder can grind based on the type of sieve selected.
• Use a power cord as specified in the "power cord gauge" table in this manual, page 22.
• Before inserting any type of forage or grain, switch the engine on and wait until it reaches
the proper rotation.
Keep power cord away
from moving parts
Turn off and disconnect the plug from
the outlet before adjusting and cleaning
the equipment, or if the power cord is
twisted or damaged
Read the instruction
manual before using
your equipment
WARNING
SYMBOLS
Grounding
Use safety
goggles
PARAR/STOP
Wait until all of the equipment
components have come
to a complete stop
before touching them
19
Do not touch
Operator's manual;
operating instructions
Keep people and children
away from the hazard zone which
is of approximately
15 meters (16 yards)
EN
Voltage selector switch
127 V / 220 V
Do not expose the equipment
to humidity or rain