Tramontina TRF25 Manual De Uso Y Mantenimiento página 24

EN
Be careful not to overload the engine. Adjust the grain inlet tray to let enter only the amount of
material the shredder can grind based on the type of sieve selected. Overloading the engine can cause
damage which is not covered by the warranty.
Forage – operating with green
Remove the sieves from inside the machine before inserting any materials in the green funnel.
The end product can come out the top of the shredder by using the olain sieve inside the shredder.
Place the materials to be ground inside the green funnel, from where they are then processed
[Fig. 13].
While the shredder is operating, do not put your hands inside the greens funnel nor into
the bottom outlet.
Before any maintenance or adjustment to the shredder, switch the engine off and unplug
the shredder.
Fig. 12
Fig. 13
MAINTENANCE
24
01
02