Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Install the shredder in a dry place not exposed to weather and on a level floor. Be sure that the
shredder tension is the same as the electric outlet. Connect the power cord to the switch. To switch
the shredder on, press the black button (I) located on the side of the machine. To switch off, press the
red button (0) [Fig. 08]. If the engine fails to start (is locked) when you switch the shredder on, switch
it off immediately, unplug the cable from the socket, and check what is wrong.
Power cord gauge
Section
Engine 2 hp
Engine 3 hp
Using power cords other than those specified can damage the engine and is not covered by the
warranty.
Grinding grains and forage
Before inserting any kind of forage or grains, switch the engine on and wait until it reaches
the proper rotation.
Grains – operating with dry products
To prevent accidents and maintain the shredder in good working condition, be sure to install the sieve
correctly.
OPERATION AND APPLICATION
20 m
127 V
220 V
2 x 2.5 mm
2 x 2.5 mm
2
2
2 x 4.0 mm
2 x 4.0 mm
2
2
Fig. 08
30 m
127 V
220 V
2 x 4.0 mm
2 x 2.5 mm
2
2
2 x 4.0 mm
2 x 4.0 mm
2
2
22
40 m
127 V
220 V
2 x 4.0 mm
2 x 2.5 mm
2
2
2 x 4.0 mm
2 x 4.0 mm
2
2
Publicidad
Tabla de contenido
