Installation; Unpack The Work Light; Install The Battery Pack; Remove The Battery Pack - GreenWorks Pro WL60A00 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:
Cover the terminals of the battery with heavy-duty
adhesive tape.
DO NOT try to remove or destroy any of the battery
pack components.
DO NOT try to open the battery pack.
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
DO NOT put these batteries in your regular household
trash.
DO NOT incinerate.
DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.
Take them to a certified recycling or disposal center.
8

INSTALLATION

8.1

UNPACK THE WORK LIGHT

WARNING
It is not necessary to assemble the work light.
If parts are damaged, do not use the work light.
If you do not have all the parts, do not operate the work
light.
If the parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove the work light from the box.
4. Discard the box and packaging material in compliance
with local regulations.
English
8.2

INSTALL THE BATTERY PACK

If the battery pack or charger is damaged, replace the
battery pack or the charger.
Stop the work light and wait until the motor stops
before you install or remove the battery pack.
Read, know, and follow the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.3

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the work light
7
WARNING
EN

Publicidad

Tabla de contenido
loading

Productos relacionados para GreenWorks Pro WL60A00

Tabla de contenido