Gude GUS 650 Instrucciones De Uso página 13

•
Press the processed material slightly and move
the support plate and processed material back
and forth all the time, otherwise the cutting edge
would be sharpened unevenly (picture 3d).
•
When sharpening, move the processed material
along the support plate further downwards and
also from side to side (picture 3e).
•
Use the on/off button to put the multi-purpose
sharpener out of service.
• Check whether the cutting edge angle is correct
(picture 3f). Check whether the processed
material is sharpened sufficiently and repeat the
sharpening process if necessary.
• Let the sharpening stone stop completely and
then remove the adapter.
•
A distance piece included in the supply (picture
3g) is needed to sharpen thin chisels.
•
The cutting edge must be ground on an oil stone
after sharpening.
Guarantee
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on
the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations and
assembly manual, and normal wear and tear.
Residual risks and protective measures
Direct electrical contact
A faulty cable or plug can cause electric shock
dangerous to life.
Have any faulty cable or plug replaced by a specialist at all
times. Use the appliance only with connection fitted with a
safety switch against stray current (RCD).
Indirect electrical contact
Indirect local lighting
Insufficient lighting represents a high safety risk.
Sufficient lighting must always be ensured when working
with the appliance.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible.
Protect the injured person from other injuries and calm
him/her down.
First aid kit must always be available in the place of
your work in case of accident in accordance with DIN
13164. Material taken out of the first aid kit needs to be
supplemented right away.
If help is needed, please provide the following details:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Use as designated
The multi-purpose sharpener is great for sharpening of
HSS drills, knives without corrugated grindstone,
scissors without corrugated grindstone and chisels. It is
not suitable for sharpening of premium steel or ceramics.
Any other use is conflict with the use as designated.
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" chapter.
Transport packaging disposal
The packaging protects the appliance against damage
during transport. The packaging materials are usually
selected depending on their environment friendliness and
disposal manner and can therefore be recycled.
Returning the packaging into circulation saves raw
materials and reduces waste disposal costs.
Parts of the packaging (e.g. foils, Styropor®) can be
dangerous to children. Risk of suffocation!
Keep parts of the packaging out of reach of children and
dispose them as quickly as possible.
Operating staff requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance requires only appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Service
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
13