Tabla De Contenido; Safety - Toro Flex-Force Power System 60V Manual Del Operador

Contents
Safety ....................................................................... 3
Safety and Instructional Decals .......................... 7
Setup ........................................................................ 8
Installing the Bar and Chain ................................ 8
Assembling the Pole Saw ................................... 9
Adding Bar and Chain Oil to the Pole
Saw............................................................... 10
Installing the Harness ........................................11
Product Overview ....................................................11
Specifications .................................................. 12
Operation ................................................................ 13
Before Using the Pole Saw ............................... 13
Starting the Pole Saw ....................................... 13
Shutting Off the Pole Saw ................................. 13
Cutting with the Pole Saw ................................. 14
Pruning a Tree .................................................. 15
Removing the Battery Pack .............................. 15
Maintenance ........................................................... 16
Recommended Maintenance Schedule(s) ........... 16
Checking the Oil Level and Adding Bar and
Chain Oil ....................................................... 16
Checking the Flow of Bar and Chain
Oil ................................................................. 17
Adjusting the Chain Tension ............................. 17
Servicing the Guide Bar, Chain, and Drive
Sprocket........................................................ 19
Installing the Guide Bar and Chain .................... 20
Sharpening the Chain ....................................... 20
Service ............................................................. 20
Storage ................................................................... 21
Troubleshooting ...................................................... 22

Safety

WARNING
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
IMPORTANT SAFETY
INSTRUCTIONS
I. Work area safety
1. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses, or dust. Power
tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
II. Electrical safety
1. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
3. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
5. When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
3