American Standard Studio S 7105121 Manual Del Propietário página 5

3
MAKE WATER SUPPLY AND WASTE CONNECTIONS
• Connect FLEXIBLE SUPPLIES (1, 2) directly to wall
supplies.
Connection on fitting supplies are 3/8" compression.
Connect right SUPPLY (2) to Hot (Marked with a Red
Band) and left supply to COLD (1) wall supply.
• Faucet supplies are 20" long from faucet base.
Note: If additional supply length is required,
installer must purchase additional parts
separately.
Important: If SUPPLY HOSES (1, 2) are to long,
loop as illustrated to avoid kinking.
• Connect 1-1/4" O.D. tail piece on PUSH DRAIN
to waste outlet.
A
4
TEST INSTALLED FITTING
• With HANDLE (1) in OFF position, turn on WATER
SUPPLIES (2) and check all connections for
leaks.
• Remove AERATOR (3).
• Operate HANDLE (1) to flush water lines
thoroughly.
• Replace AERATOR (3).
A
APPROX. 20"
2
RED
BAND
HOT
ON
1
WASTE
OUTLET
2
"P" TRAP
1
BLUE
BAND
3/8" COMPRESSION
COLD
OFF
COLD
HOT
3
2