Use And Operation - Newlux WindPure Tower W130 Smart Manual De Instrucciones

USE AND OPERATION

Before using, check the unit is in good condition and the power
cord is not damaged. If damaged, contact the seller or Technical
Service (TAS).
Device operation
Control panel
You can switch on the fan via the control panel on the top of the fan or
via the remote control.
• Plug the fan into the power socket; the LED display shows the
current temperature.
• Press the ON/OFF
medium speed.
• Press the SPEED
or high. The speed level is shown on the LED display.
V1 = Low
• Press the MODE
or sleep. The mode is shown on the LED display.
Wind = normal
• Press the ROTATE
the oscillation, press the ROTATE button again.
Maximum angle:: 70º
button and the fan will start running at
button to select the level you want: low, medium
V2 = Medium
button to set the fan mode to: normal, nature
Nature
button to make the fan rotate on itself. To stop
LED screen
V3 = High speed
Sleep
21 |