Use And Operation - Newlux WindPure Stand W1050 Smart Manual Del Usuario

USE AND OPERATION

Before each use, check that the unit is in good condition and
that the power cord is not damaged. If the power cable is damaged,
contact the dealer or Technical Services (TAS).
Device operation
Control panel
Switch on the fan via the control panel on the top of the fan or via the
remote control.
• Press the ON/OFF button
• Press the SPEED button
The speed is shown on the LED display.
V1 = Low speed
• Press the ROTATE button
automatically. If you want to stop the oscillation, press the ROTATE
button again.
Maximum angle: 90°.
| 22
Oscillation/ Timer setting
Speed
ON/OFF
LED display
Timer
to start the fan.
to select the level: low, medium or high.
V2 = Medium speed
to make the fan rotate on itself
V3 = High speed