Standard Delivery; In The Event Of Problems - sylvac Hi Cal 300 Manual De Instrucciones

Standard delivery

Hi_Cal V2 150 mm
Hi_Cal V2 300 mm
Hi_Cal V2 450 mm
Including:
• 1 fixed probe, with saphire ball
• 1 master gauge
• 1 charger 9 V | 1660mA (mains AC voltage according to the country)
• 1 protection cover
• 1 calibration certificat
• 1 instruction manuel
• Other accessories: see the site www.sylvac.ch

In the event of problems

It is possible to make a complete shutdown (equivalent to removing the
power supply) by pressing >5s on the ON button.
The ON button must then be pressed for >0.5s to restart the instrument.
Re-initialising the instrument
The initial instrument settings can be restored at any time by a prolonged
press (>4 sec) simultaneously on
displayed.
Menu Settings
Access:
- Switch on the instrument by pressing ON + SETUP
- Wait for the «init» display and then navigate using the keys
Lin correction +/-999 μm/m
LIn
3 mm
MIN MIN
REF REF
Setup Setup
MAX MAX
Quit Quit I / II I / II
DEL DEL
and until the message rESEt is
SET SET
Clear Clear
Réf. N° : 830.0156
Réf N° : 830.0306
Réf N° : 830.0456
.
MIN
Setup REF
MAX
Quit I / II
DEL
SET
Clear
E
25