Publicidad
Frame Assembly Pt. 3
Ready:
Lift Z-axis Frame Right Z-axis Frame
8pcs
M5X30
Make sure the front of the bo�om frame is facing you .
Step 1.
Place double Z-axis frame inside of previously assembled frame. The double Z-axis frame is mounted on the le� and right 2040 aluminum
Step 2.
profiles of the top frame and must be aligned with the aluminum profile. Making sure the motor is on the bo�om, a�ach the frame to
the lower and upper assembly with a M5x30 screw and washer at each corner. The upper and lower assembly extrusions will have
corresponding pre-drilled holes for these screws.
A�er the installa�on of the double Z-axis frame is completed, please check if your Y-axis can move smoothly. If the movement is
Step 3.
hindered and the aluminum profile is rubbed, please adjust the eccentric nut and reassemble your Z-axis frame.
Behind
23
Publicidad
