Installing The Refrigerator; Reinstall Freezer Drawer; Removing French Doors - IO Mabe IWO19JSPFSS Instructivo Y Advertencias

INSTALLING THE REFRIGERATOR

REMOVING FREEZER DRAWER
REINSTALL
3
FRONT
Pull the rail assemblies to the maximum exten-
A
sion.
Locate the slots on the inside of each slide.
B
Insert the hooks on the ends of the drawer
C
assembly extensions into the slots near the
back of the slides.
Lower the front end of the freezer drawer
D
assembly so the side tabs fit into the front slots
on the rail assemblies.
Replace the safety screws in both sides of the
E
slide assemblies.
F Replace lower and upper baskets (see About
freezer drawer, page 28).
FREEZER DRAWER
Hook
Slot
Side Tab
Front Slot

REMOVING FRENCH DOORS

(on some models)
WARNING
ing the door swing. Failure to follow these instruc-
tions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury
and property damage.
IMPORTANT NOTES
When removing french doors:
• Read the instructions all the way through before
starting.
• Handles are included inside the refrigerator.
• Place the screws by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To eliminate the risk of electric shock or injury
during installation, you must first unplug the
refrigerator before proceeding. Failure to follow
these instructions can result in electrical shock.
Tape the doors shut with adhesive tape.
Follow all steps when revers-
11