Window Slider Kit Installation; Double-Hung Sash Window - Easy Home EPA080BAUW Manual Del Usuario

Installation Installation

Window slider kit installation

Installation in a double-hung sash window
Your window slider kit has been designed to fi t
most standard vertical and horizontal window ap-
plications, however, it may be necessary for you to
modify some aspects of the installation procedures
for certain types of windows.
Visit www.danby.com for general instruction
videos.
Press the exhaust hose into
the window slider adapter and
unit adapter. The adapters
will automatically clamp to the
exhaust hose using internal
elastic buckles.
Slide the exhaust hose unit
adapter into the air outlet open-
ing in the direction of the arrow.
Measure the window opening where the window kit
will be installed and extend the sliders to match the
measurement. If the length of the window open-
ing requires three window sliders, use the bolt to
fasten the sliders at the proper length.
If the window opening is less than the minimum
length of the window slider kit, use the single slider
that has the hole in it and cut it to the correct size.
Ensure that you do not cut the end of the slider
that has the hole in it, this will ne necessary to
attach the exhaust hose assembly.
10 11