System Requirements; Product Overview - Eaton Tripp-Lite MTB4-HUB3-01 Manual Del Propietário

System Requirements

• Host computer that is either a Thunderbolt 4-enabled Windows 10 PC
or Thunderbolt 3-enabled Mac running at least macOS 11
Note: The host computer must support Windows 10 or higher or
macOS 11 or higher for the hub to function properly. See
Troubleshooting section for details.
• Thunderbolt or USB-C monitors capable of achieving video resolutions
up to 8K (7680 x 4320) @ 30 Hz (single display) or
4K (3840 x 2160) @ 60 Hz (dual displays)
Note: If using a USB-C-enabled monitor, the dock will only function
properly with a passive Thunderbolt cable, such as Tripp Lite's
MTB3-XXM-5A-B cables. If using a Thunderbolt-enabled monitor, a
passive or active cable can be used.

Product Overview

Front
1
Thunderbolt 4 Input Port
2
USB 3.1 Gen 2 (10 Gbps) Port
Rear
4
3
Thunderbolt 4 Output Ports
4
100W (20V 5A) DC Power Input
1
3
2
3