Eaton Tripp-Lite MTB4-HUB3-01 Manual Del Propietário página 4

Installation
Note: The host computer must support Windows 10 or macOS 11 or
the hub will not function. See Troubleshooting section for details.
1. Connect the Thunderbolt 4 input port of the hub to the Thunderbolt 4
or Thunderbolt 3 port on your computer or laptop using the included
Thunderbolt 4 cable.
2. Connect up to three Thunderbolt devices to the hub's three
Thunderbolt ports.
OR
3. Connect the hub to a single 8K (7680 x 4320) @ 30 Hz-enabled
display or two 4K (3840 x 2160) @ 60 Hz-enabled displays using
Thunderbolt 3 cables (such as Tripp Lite MTB3-Series Active
Thunderbolt 3 cables).
4. Connect a USB peripheral to the USB 3.1 Gen2 port.
Troubleshooting
Does the host computer support Windows 10 or macOS 11?
The MTB4-HUB3-01 requires the host computer to support either
Windows 10 or macOS 11 to function properly. If the host computer has
a Thunderbolt 4 or Thunderbolt 3 port, but does not support either of
those operating systems, then the hub will be able to charge the host
computer and any connected devices, but will not transmit video to
connected monitors.
How many displays can be connected at one time?
The MTB4-HUB3-01 supports video transmission to Thunderbolt- or
USB-C-enabled monitors. A single display can achieve up to 8K
(7680 x 4320) @ 30 Hz video. Two displays can be connected
simultaneously at 4K (3840 x 2160) @ 60 Hz resolutions. The hub
will not support video transmission from all three Thunderbolt ports
simultaneously.
4