Lighting The Display; Displaying The Date; Setting The Alarm - Auriol HG01601A Instrucciones De Utilización Y De Seguridad

§ Lighting the display
Press and keep pressed the LIGHT button 8 to
switch on the light.
Release the LIGHT button 8 and the light will
switch off after approx. 3 seconds.
§ Displaying the date
Press the START button 2 while the watch is in
time mode. The date appears on the display.
Release the START button 2 to return to time
mode.
§ Setting the alarm
Press the MODE button 6 twice to enter the
alarm mode. The hour field of the alarm time
flashes in the display.
Press the START button 2 to set the desired
hour value.
Press the RESET button 4 to confirm your
setting. The minute field flashes in the display.
Press the START button 2 to set the desired
minute value.
Press the RESET button 4 to confirm your
setting.
Press the MODE button 6 to enter the time
mode.
GB/IE 21