Sanyo VCC-P6784 Manual De Instrucciones página 23

L5BY2_US(VCC-P6784)(GB_FR_ES).book 22 ページ ２００７年１２月７日 金曜日 午後３時３９分
5
Specify the masking size and press the SET
button.
SIZE
111
111
• To set two or more masks, repeat steps
You may set up to 4 masks.
MEMO: If [ALARM SIGN] is set to "ON" (see page 27), when the camera receives
the alarm signal, the alarm indication "A" will be shown for all masks as
long as the time set in [DURATION] (see page 26). If [MOTION] is set to
"ON" (see page 24), the alarm indication "A" will also be shown when the
motion sensor detects any movement.
All manuals and user guides at all-guides.com
RReturns to the MASK
NO.SELECT screen.
3 to 5.
Hiding Partial Image <PRIVACY MASK>
■ To preview where masks are set
1 Select [PREVIEW] and press the SET button.
<Example: When 4 masks are set>
MASK 1 2
MEMO:
22
If two or more masks are overlapped,
3333 22 the smallest mask number will be
111 3333 shown.
111
4
4
3
4
2 When finished previewing the set masks, press the SET button
again to return to the Mask setting screen.
Note: When masks are set, the monitor does not display the camera name
even if [TITLE] is "ON".
■ To delete a set mask
On the MASK NO. SELECT screen, set the mask number you
want to delete to "OFF".
■ To change the position or size of a set mask
1 On the MASK NO. SELECT screen, set the mask number whose
position/size you want to change to "ON" and press the SET
button.
4 and 5.
2 Repeat steps
22
GB