Sanyo VCC-P6784 Manual De Instrucciones página 26

L5BY2_US(VCC-P6784)(GB_FR_ES).book 25 ページ ２００７年１２月７日 金曜日 午後３時３９分
Setting Alarm <ALARM>
Motion Sensor Setting (continued)
5
Select [uSENSITIVITY] and press the SET button.
ALARM SETTING
ALARM IN NO
MOTION
ON
u AREA
SET
u
· SENSITIVITY SET
ZOOM
OFF
u ZOOM TIME 5S
DURATION
5S
ALARM SIGN
OFF
PRESET OFF
MENU
BACK
RThe SENSITIVITY screen appears.
6
Select <MOVE> and specify a sensitivity level
(1 –10).
SENSITIVITY
<MOVE>
·
<TIME>
TEST SET
PRESET
OFF
MENU BACK
RThe greater the number, the lower the responsiveness to
movement becomes.
25
GB
All manuals and user guides at all-guides.com
y
y
5
1
y
7
Select <TIME> and specify a detection time of
duration (1 – 60).
RThe greater the number, the lower the detectability against
fast-moving subjects.
■ To confirm the sensitivity of the motion detection
Select [TEST] and press the SET button.
• Make sure that the motion-detected area is properly specified by
placing your hand or other objects in front of the lens.
To finish the test, press the SET button.
MEMO: If [ZOOM] is set to "ON" (see page 26), the corresponding image will be
zoomed in when the motion sensor detects any movement.
If [ALARM SIGN] is set to "ON" (see page 27), the alarm indication "A" will
be shown for all masks if [PRIVACY MASK] is set (see page 21).