ErgoAV ERMTM2-01B Manual De Instalación página 10

2A-2
2A-3
2A-4
A1
Position the wall plate template [04]
at your desired height and line up
the holes with your stud center line.
Level the wall plate template [04]
04
and mark the holes.
Mmwxxqwxh4,hxDX/XwbgCwb
(5.5mm) diameter drill bit. Make
sure the depth is not less than
0B##
Note: Do not use a drill to tighten the
,@dq.IwUq(B,z•qw@qk.NwjUIwB.5
01
10
(Not Included)
0B ## ‚
Install the wall plate using lag
screws [A1]. Tighten the lag
q.IwUqpoT0qy•,,wc‰ I #,z
against the wall plate (n(1
over-tighten the lag screws
[A1].
Level
(Not Included)
Pencil
Level
(Not Included)
Electric drill
(Not Included)
0B##
4k.Nwj3IwB.5
(Not Included)