Correct Use; General Safety - Meister basic BHKS 1200 LB LASER Traducción De Las Instrucciones De Servicio Originales

5403630-Handkreiss-man_a 02.12.11 12:56 Seite 60
10 Connection for dust extractor
11 Cutting angle adjustment
12 Cutting depth adjustment
13 Laser projector
14 Laser optic
15 Laser on/Off switch
16 Battery compartment cover
17 Vacuum-cleaner adapter
4 – Correct use
This circular hand saw may only be
operated in manual operation in a
domestic situation. It is suitable for use
with the supplied saw blade for straight
cuts in wood and wood materials in
accordance with the specifications
made in this operating manual. With the
suitable saw blades fitted (observe the
manufacturer specifications!) the
machine is also suitable for use with the
following materials: Plastics, thermal
and thermoset plastics, laminated
plastics, expanded plastic slabs,
plasterboard, rock wool slabs, cement-
bonded chipboard, aerated concrete
and non-ferrous metals. All other uses
are expressly excluded.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
60
(cordless) power tool.
All manuals and user guides at all-guides.com
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
b Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
2 Electrical Safety
a Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
d Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.