brennenstuhl CAL 1 Manual De Instrucciones página 6

CHARGING THE BATTERY / POWERBANK
A
C
B
1. To ensure optimal function, we recommend fully discharging the battery once at
2. The USB charging input (A) is located under the cap on the back of the lamp.
battery is fully charged, the charging indicator (B) lights up green.
4. When using the USB output ( C ) to charge external devices, the charging
indicator (B) lights up red.
5. When not using the battery for a long time, charge the battery approximately
every 3 months to ensure a long battery life.
6. The product can be operated while charging.
7. After charging, be sure to reseal the charging port with the cap.
SCOPE OF DELIVERY
Lamp, Micro USB cable, manual
MAINTENANCE
ATTENTION: The LED lamp does not contain
components that require maintenance. The light
source in this lamp cannot be replaced; if the light
source has reached the end of its service life, the
entire lamp has to be replaced. The lamp may not be
opened.
CLEANING
Before cleaning, disconnect the product from the mains power.
Do not use solvents, caustic cleaning agents or similar products. Only use a dry or
slightly moistened cloth for cleaning.
-9-
A USB charging input
B Charge indicator
C USB output
DISPOSAL
Dispose of electric appliances in an environmentally friendly
manner!
Electric appliances must not be disposed of in household waste!
The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment rules that used electric appliances should be
collected separately and recycled in an environmentally friendly
manner.
For possibilities of disposal of the used appliance, please contact
your local or municipal administration.
Batteries and rechargeable batteries may not be disposed of in
household waste!
As a consumer, you are legally obligated to dispose of all
batteries and rechargeable batteries at a collection point in your
municipality/your district or in a shop so that they can be disposed
of in an environmentally-friendly manner, otherwise there are
possible risks to the environment and human health.
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
ADDRESSES
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
lectra technik ag
Blegistrasse 13 · CH-6340 Baar
Brennens tuhl UK Ltd
No 1 Royal Exchange · London EC3V 3DG, UK
For more information please visit the Service/FAQ section on our homepage,
www.brennenstuhl.com.
-10-