WERKU WK400100 Instrucciones Originales página 3

ENG
invites to accidents
►
before starting the power tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
Do not force the power tool
►
power tool for your application
tool will do the job better and safer at the rate for
which it was conceived
if the switch cannot be positioned to "off" and "on"
position Any power tool that cannot be controlled
►
with the switch is dangerous and must be repaired
Remove the plug from the power supply and/or
►
battery before making any adjustments, changing
accessories or storing the power tool
preventive safety measures reduce the risk of
starting the power tool accidentally.
STORE POWER TOOLS.
Store power tools out of reach of children and
►
not allow the handling of power tools to people
unfamiliar with the tools or these instructions
Power tools are dangerous in the hands of
►
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of power tools
Power tools are repaired before use when they
►
are damaged Many accidents are caused by
►
poorly maintained power tools
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of power tool, taking into account
the conditions work and work to develop
of the power tool for applications other than those
intended could result in a dangerous situation
Please check your power tool serviced by a
►
Werku official repair service using only identical
®
replacement parts
►
the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
SANDER.
Make sure that all the screws in the sander are
►
perfectly tightened In cold climates or when the
►
sander has not been used for a period, allow the
sander to warm up by leaving it to run empty for a
few minutes, to ensure that all internal components
are perfectly lubricated
installed accessories are perfectly fitted in place.
Remove keys or tools
A left key or tool
►
Use the correct
►
The correct power
►
Do not use the power tool
►
Such
►
Use power tools,
►
►
This will ensure the safety of
Make sure that the possible
►
BEFORE STARTING WORK.
Make sure that the suction sander is firmly
►
supported before using
standing beneath you when using the suction
sander in high areas
from all moving parts of the suction sander.
DURING THE OPERATION.
Do not leave the suction sander operating without
►
having it firmly fixed
are sure you have full control over it
the suction sander at anyone while in use
operating the suction sander will produce vibrations
The screws may gradually come loose, and
►
possibly cause faults or accidents
away from all moving parts of the suction sander.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the suction sander after use
cause burns
contain chemicals or toxic components
inhaling these substances or allowing them to
come into contact with your skin
designed to prevent and protect against incidents
of this kind.
DESCRIPTION OF THE PRODUCT.
The sander has been designed to carry out jobs
►
of polishing and sanding
familiarize yourself with the sander before use.
The use
1. Switch.
2. Handle.
3. Dust collector.
4. Base.
5. Speed selector.
3
English
Check that no one is
►
Keep your hands away
►
Only turn it on when you
►
►
It may be hot and
►
Some materials worked with may
►
►
Refer to this plan to
►
2 1 5
4
Do not point
►
When
►
Keep your hands
Avoid
►
Use PPE
3