Loop Recording - VANTRUE Element 1 Manual Del Usuario

4.2. Specifications
EN

4.2.1 Loop Recording

After inserting the memory card and connecting the power, the E1 dash
cam will auto turn on and enter loop recording. The duration of each
recorded video will be saved in the normal video folder according to the
loop recording time you set.
When the capacity of the normal video folder reaches 70% of the total,
new loop recording files will automatically overwrite original loop record-
ing files. After this function is enabled, the video file will automatically
overwrite the loop, so as not to stop recording during the driving process.
Notice:
The normal operation of the loop recording function is very dependent
1.
on the speed of the memory card, so please format the memory card
regularly to avoid problems such as excessive memory card files and
card aging that affect normal loop recording.
2. Please check the loop recording video regularly to avoid necessary
videos being overwritten.
3. When Loop Recording is turned off, the camera will record video in 5
minute clips, but it will not overwrite old videos when the storage card
is full.
After the loop recording is turned off, the duration of each video will
4.
be 20 mins, and the recording will stop when the memory card
capacity is full.
- 19 -