Tripp-Lite B127A-002-BH Manual Del Propietário página 11

Installation
B127A-002-BHPH2
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
1
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
2
HDR PLAYER
1. Make sure all equipment in the installation—such as TVs,
Blu-ray™ players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect
the HDMI source to the INPUT port on the local transmitter
unit.
3. Optional: For extended range, connect up to two
B127A-010-H signal repeater units to the splitter and each
receiver via Cat6 cabling.
4. Using Cat6 cable (such as Tripp Lite N202-Series 24 AWG
Cat6 Cabling), connect the RJ45 port on the local splitter
unit to the RJ45 port on the remote receiver unit.
B127A-1P0-PH
B127A-002-BH
B127A-1P0-PH
11