Installation; General Installation Instructions; Scope Of Delivery; Tools And Aids - FRECAN FLOW 53 Manual De Instalación Y De Usuario

4 Installation


Observe all safety and warning information (see
the "Safety Instructions and Warnings" chapter).

Follow the enclosed manufacturer's information

Make sure that the area below the cooktop has
a sufficient air supply.

4.1 General installation instructions


The power supply cable must be provided by the
customer.

The appliance must not be installed above
cooling devices, dishwashers, stoves, ovens,
washing machines or dryers.

The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).

Worktop cut-outs must be moisture-sealed using
suitable means and, where necessary, fitted
with a thermal insulator.

The integrated cooktop extractor must not be
used with other cooktops.

To ensure that the cooktops perform optimally at
all times, there must be sufficient ventilation
beneath the cooktops.

The performance of the cooktops is affected or
the cooktops overheat if the warm air beneath
the cooktops cannot escape.

If a cooktop
automatically reduced or the cooktop is switched
off completely (see "Overheating protection").

If cable protection (false floor) is planned
beneath the appliance, this must be fitted so it
does not obstruct ventilation.
overheats, the power
Installation

4.2 Scope of delivery

Scope of Delivery: Opera
Cooktop with integrated extractor
Air inlet flap
Grease filter
Operating and installation instructions
Cleaning instructions
Duct tape
Sealing tape
Bag containing assembly parts
Metal sheet black canalization
Metal sheet telescopic extension
Vertical ducting
90° bend ducting

4.3 Tools and aids

The following special tools are required to correctly
install the cooktop:

Compass saw or hand saw

Meter

Torx 25 screwdriver

Cross-head screwdriver

Black, heat-resistant silicone sealant
is
EN
Quantity
1
1
2
1
1
1
3
1
1
1
1
1
11