Power Boost; Power Management - FRECAN FLOW 53 Manual De Instalación Y De Usuario

Operation

5.23 Power boost

The power boost setting makes additional power
available for induction cooking zones. A large quantity
of water can be brought to the boil very quickly.
1. Switch on the hob. Use the power setting display (as a
key) to select a cooking zone. The stand-by dot of the
cooking zone selected will light up.
2. Touch the P symbol on the slider area. The booster for
the selected cooking zone is activated. The display for
the cooking zone shows a "P".
3. Power boost function is de-activated automatically after
5 minutes.
Please note
Press the sensor field slider to prematurely de-activate
the power boost.

5.24 Power management

For technical reasons two cooking zones (i.e. front left +
rear left, or front right + rear right) always comprise a
module and have a maximum power level to prevent
the mains connection from overloading.
The power management is prioritizing, i.e. the cooking
zone which heating power has been increased at last will
get the desired heating power and the other cooking
zone of the same module will be reduced in its heating
power. Additionally, the reduction of power will be
signalled by flashing.
EN
30