Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
;Ice maker
The ice maker produces ice cubes.
The ice maker will only work when the
Note:
appliance is connected to a drinking water supply
and a filter is installed.
Before using the appliance for the first
time
As soon as the appliance is switched on and the
■
freezer compartment reaches the set
temperature, the first batch of ice cubes will be
ready in approximately 4 hours.
For hygiene reasons, ice cubes produced within
■
the first 24 hours should be discarded.
Switching ice cube production on or off
9
WARNING
RISK OF INJURY!
Never reach under or into the ice maker.
9
CAUTION
Damage to the appliance!
Never store bottles or food in the ice cube bin
when ice cube production is switched on. This
may block and damage the ice maker.
Open the freezer drawer up to the stop.
1.
Move up the ice maker flap to open.
2.
Press " button for the ice maker.
3.
If ice cube production is switched on, the button
lights up.
Close the ice maker flap and freezer
4.
compartment drawer.
All manuals and user guides at all-guides.com
Notes
■
■
■
■
=Defrosting
T he fully automatic NoFrost system ensures that the
D e f r o s t i n g
appliance remains frost-free. Defrosting is not
required.
Once ready, ice cubes are automatically
discharged into the ice cube bin.
Ice cube production stops automatically when the
maximum filling level of the ice cube bin is
reached.
You can accelerate ice cube production by
setting a colder freezer compartment temperature
or switching on super freezing. This will slightly
increase energy consumption.
If ice cubes taste stale, discard the rest and the
cubes produced over the next 24 hours. If ice
cubes still taste stale, change the water filter.
Defrosting en-us
27
Publicidad
Tabla de contenido
