Ice Maker; Before Using The Appliance For The First Time; Switching Ice Cube Production On Or Off; Defrosting - Bosch B36CT Serie Instrucciones De Uso Y Montaje

;Ice maker

The ice maker produces ice cubes.
Note: The ice maker will only work when the
appliance is connected to a drinking water supply
and a filter is installed.
Before using the appliance for the first
time
Switch on ice cube production.
■
As soon as the freezer compartment reaches the
set temperature, the first batch of ice cubes will
be ready in approximately 4 hours.
For hygiene reasons discard the ice produced
■
within the first 24 hours.

Switching ice cube production on or off

9
WARNING
RISK OF INJURY!
Never reach under or into the ice maker.
9
CAUTION
Damage to the appliance!
Never store bottles or food in the ice cube bin
when ice cube production is switched on. This
may block and damage the ice maker.
Open the freezer drawer up to the stop.
1.
Move up the ice maker flap to open.
2.
Press " button for the ice maker.
3.
If ice cube production is switched on, the button
lights up.
Close the ice maker flap and freezer
4.
compartment drawer.
Notes
Once ready, ice cubes are automatically
■
discharged into the ice cube bin.
Ice cube production stops automatically when the
■
maximum filling level of the ice cube bin is
reached.
You can accelerate ice cube production by
■
setting a colder freezer compartment temperature
or switching on super freezing. This will slightly
increase energy consumption.
If ice cubes taste stale, discard the rest and the
■
cubes produced over the next 24 hours. If ice
cubes still taste stale, change the water filter.

=Defrosting

T he fully automatic NoFrost system ensures that the
D e f r o s t i n g
appliance remains frost-free. Defrosting is not
required.
Defrosting en-us
27