General safety instructions
1
General safety instructions
H Safety precautions
Installation/assembly must be carried out by an
authorised qualified person with due regard to the
relevant regulations. Failure to comply with the
regulations may result in material damage and/or
personal injury, including risk to life.
▶ Check that the scope of delivery is undamaged.
Install only parts which are in a faultless condition.
▶ Observe all the relevant instructions for other
system components, accessories and spare parts.
▶ Before starting any work: disconnect the system
from the power supply across all phases.
▶ Never install the product in wet rooms.
▶ The installation location must not be higher than
2000 m above sea level.
▶ More safety instructions can be found in the
technical documentation of the indoor units.
28
G 10 CL-1 – 6721824785 (2021/12)