Setup - SteelSeries STRATUS+ Guía De Información Del Producto

SETUP

CONNECTION MODES
INITIALIZATION
1 Turn on your Stratus+ by pressing and holding the Home Button (6) .
2 All four Player Indicator LEDs (3) will flash to indicate your
SteelSeries Stratus+ is in pairing mode .
3 To pair your Stratus+ to your Android device, go to Settings →
Bluetooth . "Stratus+" will be displayed on the screen . Tap to Connect .
SWITCHING BETWEEN WIRELESS AND WIRED MODE
The Stratus+ has an auto-detect feature to go into wired or wireless mode
when first searching for a connection . But if you are already connected
wired or wirelessly and want to switch to the other mode, follow these
steps:
If the Stratus+ is wirelessly connected and you want to switch to wired
mode:
1 Use the USB-A to USB-C Play and Charge Cable (14) to connect
the controller to the device you want to connect to in wired mode .
2 Simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds .
3 The LED pattern change will indicate that the controller switched from
wireless to wired mode .
If the Stratus+ is connected via wired USB-C to another device and you
want to switch to wireless mode:
6
Play & Charge
Windows
Android
1 While the controller is on and connected to another device,
simultaneously press and hold down the Back/Select Button (2) and
the Forward/Start Button (4) for 2 seconds .
2 The LED pattern change will indicate that the controller switched from
wired mode to wireless search mode .
PAIRING TO A NEW DEVICE
1 Press the Wireless Pairing Button (9) for 3 seconds .
2 All four Player Indicator LEDs (3) will flash to indicate that your
Stratus+ is in pairing mode .
3 Open the Bluetooth menu on your mobile device and make sure it is
scanning for available devices . Find "SteelSeries Stratus+" and press
to connect .
RECONNECTING TO AN EXISTING DEVICE
1 Turn on your Stratus+ by pressing and holding the Home Button (6) .
2 During the connecting sequence, the Player Indicator LEDs (3) will
cycle from 1 to 4 . The Stratus+ will automatically reconnect to the
most recent device when powered on .
3 If the Stratus+ doesn't automatically connect to the device, open up
the Bluetooth menu on the desired device and find the "SteelSeries
Stratus+" in available devices . Press to connect .
Note: If you want to connect to a previously paired device, simply select
the Stratus+ from the Bluetooth menu on the Android device .
More detailed product information at
steelseries .com/stratus-plus
7